2ch Purification System
PURIF-RP2
2ch Middle&High Pressure Purification system
Purif-RP2
1. From the cartridge column for Flash chromatography, simultaneous installation of the high-pressure preparation column for HPLC
2. From disposable cartridge columns to SEMI-PREP columns for HPLC are also available
3. Equipped with an integrated Fraction Collector, test tubes of various sizes, test tubes available for selection
4. Peak scan software: displaying details of the peak (e.g., height ratio, area ratio, etc.)
5. PC with touch control (based on Windows 10)
Purif-RP2 Characteristics
1. Can be fractionated and refined on a scale of μg~g
2. Sun phase and reverse phase regulation can be done with one unit
3. High Performance Pump (20MPa)
4. Sample injection with injector (20μg, 100μg, 2ml, 10ml)
5. Easy-to-use software and intuitive design for convenient maintenance
Purif-RP2 Specification
Pump | 1 medium-pressure pump |
UV Detector | 1 unit |
Fraction Collecter | 1 unit (integrated 2-channel type) |
Weight | 76kg (main unit) |
Voltage | AC 100~240V |
Power Consumption | 350VA |
Dimensions (mm) | W634 x D480 x H660 |
Flow Rate Setting Range | 1~100ml/min or 1~50ml/min |
Number of Channels | Integrated 2-channel system (*fraction nozzles can be controlled independently for each channel) |
Max. Number of Collection Tubes | Up to 80 tubes per rack |
Fraction Collection Modes | Time mode, Volume mode, Peak mode, Volume/Peak mode |
UV Detection Wavelength Range | 200~400nm |
Purif-RP2 Sub Option
Column Stand Extension Unit | Installed on the top of the main instrument |
Sample Injector Valve | For sample injection |
Fraction rack | Supports tubes with diameters of 12, 16, 18, 25, and 30 mm, as well as 200 mL and 300 mL tubes |
Valve | Manual fraction valve, tubing, manual 3-way valve |
Solvent Level Detection Sensor Unit | Optical fiber sensor method |
Air Purge Unit | Air-blow method |
Others | Degasser (50 mL), sample loop, detectors (RI, ELSD, MS) |